Configuration G-: Customized for TC Electronic processors
This video shows you the EurekaPROM-enabled FCB1010 and a G-Major 2 in action:
OverviewFour Modes, easily switched between using the Up/Down pedals:
- Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state reflected on the pedal LED
- Presets Mode: Easily enter presets 1-100, on Banks 0-9. 1000 presets!
- Favorite Presets Mode: Allows you to store and recall your 10 favorite presets with the push of a pedal!
- Specials Mode: Change the expression pedal definition to modify 10 effects parameters!
Expression Pedals programmed for 10 effects & volume. MIDI activity LED. And waterproof labels!
Modes
Switch between modes with UP/DOWN pedals.
1) EF: Effects
|
CC64
6 |
CC80
7 |
CC81
8 |
CC82
9 |
CC83
10 |
|
CC65
1 |
CC66
2 |
CC67
3 |
CC68
4 |
CC69
5 |
Notes:
- Turn Effects on/off!
- Supports 1 MIDI cable (FCB MIDI out-to-TC Electronic processor MIDI in).
- LEDs do not automatically update, but they still have state, three in fact: off, on, blip (for unknown effects state).
- You assign the effect to the CC# in the TC Electronic processor.
2) Pr: Presets
|
Bank Increment
6 |
+100
7 |
+10
8 |
+1
9 |
Send on Change
10 |
|
Bank Decrement
1 |
-100
2 |
-10
3 |
-1
4 |
Send Program Change Command |
Notes:
- Enter Presets 1-100, Banks 0-9.
- Select Banks with Pedal 1 & 6. Bank displayed in 7-segment display.
- Use Pedals 2-4 & 7-9 to select specific preset. Displayed in 7-segment display.
- Press Pedal 5 to send the MIDI Program Change command to the TC Electronic processor.
- With Pedal 10 on, a Program Change command is sent with each preset/bank change. With Pedal 10 off, Pedal 5 must be pressed for the Program Change command to be sent.
3) FP: Favorite Presets
|
Memory Location 6
6 |
Memory Location 7
7 |
Memory Location 8
8 |
Memory Location 9
9 |
Memory Location 10
10 |
|
Memory Location 1
1 |
Memory Location 2
2 |
Memory Location 3
3 |
Memory Location 4
4 |
Memory Location 5
5 |
Notes:
- Store 10 of your favorite Presets for 1 press recall!
- To store a Preset:
- In Pr mode, select preset, press Send (Pedal 5).
- Immediately Press UP to enter FP mode.
- Press and hold the pedal you wish to store the Preset for ~5 seconds. The 7-segment display will flash when stored.
- Leave FP mode.
- To recall a Preset, press and release the pedal of your choice. Note that the Program Change command is sent on the release, not the press.
4) SP: Specials - Expression Pedal CC Assignment
|
CC18
6 |
CC19
7 |
CC20
8 |
CC21
9 |
CC22
10 |
|
CC13
1 |
CC14
2 |
CC15
3 |
CC16
4 |
CC17
5 |
Notes:
- Change the left expression pedal CC assignment!
- The left pedal defaults to CC#13, but can be assigned to CC#13-22.
Expression Pedals
|
Wah
MIDI CC13 (default) Assignable in SP mode
Left |
Volume
MIDI CC12
Right |
MIDI Activity LED
- The LED is on when MIDI is sent, off otherwise.
G- FAQ
What do I need for this setup?
A TC Electronic G-Force, G-Major, G-Major 2, G-Sharp, and Nova, a Behringer FCB1010, and a MIDI cable.
How does this work with the G-Sharp? Pr & FP mode work the same. (Note that the bank is ignored by the G-Sharp). EF & SP would affect these following:
SP: PreDelay 6 | EF: Tap Tempo SP: Decay 7 | EF: Bypass SP: Color 8 | EF: Effects On/Off CC82 9 | EF: Reverb On/Off CC83 10 |
SP: Effects Mix 1 |
SP: Reverb Mix 2 |
SP: Dig Input Level 3 |
SP: Timing 4 |
SP: Feedback 5 |
|
|
