Po: Line6 PODs - EurekaSound!

Configuration Po: Customized for the Line6 POD Series

This video shows you the EurekaPROM-enabled FCB1010 and the POD 2.0 in action:

Overview

Three Modes, easily switched between using the Up/Down pedals:

Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state reflected on the pedal LED
Presets Mode: Easily enter presets 1A-32D
Favorite Presets Mode: Allows you to store and recall your 10 favorite presets with the push of a pedal!

Expression Pedals programmed for wah & volume. MIDI activity LED. And waterproof labels!

Modes

Switch between modes with UP/DOWN pedals.

1) EF: Effects

Reverb On/Off CC36 6	EQ CC63 7	Gate CC22 8	Amp CC111 9	Tap Tempo CC64 10
Comp On/Off CC26 1	Stomp On/Off CC25 2	Mod On/Off CC50 3	Delay On/Off CC28 4	Wah On/Off CC43 5

Notes:

Turn Effects on/off!
Supports 1 MIDI cable (FCB MIDI out-to-POD MIDI in).
LEDs do not automatically update, but they still have state, three in fact: off, on, blip (for unknown effects state).

2) Pr: Presets

Bank Decrement 6	Bank Increment 7	32 Bank/9 Bank 8	9	Tuner On/Off 10
A 1	B 2	C 3	D 4	5

Notes:

Enter Presets 1A-32D!
Enter preset A-D using pedals 1-4.
Decrement/Increment bank using pedals 6 & 7. Bank displayed in 7-segment display.
Turn Pedal 8 'Off' for 32 Bank PODs, or 'On' for 9 bank PODs.
Pedal 10 toggles the Tuner on/off.

3) FP: Favorite Presets

Memory Location 6 6	Memory Location 7 7	Memory Location 8 8	Memory Location 9 9	Memory Location 10 10
Memory Location 1 1	Memory Location 2 2	Memory Location 3 3	Memory Location 4 4	Memory Location 5 5

Notes:

Store 10 of your favorite Presets for 1 press recall!
To store a Preset:

In Pr mode, select preset.
Press UP to enter FP mode.
Press and hold the pedal you wish to store the Preset for about five seconds. The 7-segment display will flash when stored.
Leave FP mode.

To recall a Preset, press and release the pedal of your choice. Note that the Program Change command is sent on the release, not the press.

Expression Pedals

Wah

MIDI CC4

Left

Volume

MIDI CC7

Right

MIDI Activity LED

The LED is on when MIDI is sent, off otherwise.

Po FAQ

What do I need for this setup?
A Line6 POD Series processor (including POD 2.0, PODXT, Bass PODXT, Flex III, Vetta II, and POD X3 Pro), a Behringer FCB1010, and a MIDI cable.

Are there any restrictions with various PODs?

Yes, the CC#'s used are NOT universal so all PODs. This table shows the compatibility:

Effect	POD 2.0	PODXT	Bass PODXT	Flex III	Vetta II	POD X3
Comp	✔	✔	✔	✔	✔	✔
Stomp	✔	✔	✔			✔
Mod	✔	✔	✔	✔	✔	✔
Delay	✔	✔	✔	✔	✔	✔
Wah	✔	✔	✔	✔		✔
Reverb	✔	✔		✔	✔	✔
EQ		✔	✔		✔	✔
Gate	✔	✔	✔	✔	✔	✔
Amp		✔	✔		✔	✔
Tap	✔	✔	✔	✔	✔	✔

Have more questions? Check our Forum, or Contact us!