Configuration VA: Customized for the Behringer V-Amp Series
Discontinued Product
Embedded Files
Overview
Overview
Four Modes, easily switched between using the Up/Down pedals:
- Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state reflected on the pedal LED
- Presets Mode: Easily enter presets 1A-25E
- Improved in EurekaPROM2! Favorite Presets Mode: Allows you to store & recall your 10 favorite presets with the push of a pedal!
- New to EurekaPROM2! Effects & Presets Mode: Access Effects mode pedals 1-5 & Favorite Presets pedals 6-10 in one layout
Expression Pedals programmed for wah & volume. MIDI activity LED. And waterproof labels!
Modes
Modes
Switch between modes with UP/DOWN pedals.
1) EF: Effects
1) EF: Effects
Notes:
- Turn Effects on/off!
- Requires 2 MIDI cables connected (FCB MIDI out-to-V-Amp MIDI in & FCB MIDI in-to-V-Amp MIDI out).
- Effects state for pedals 1-9 is automatically updated on the pedal LEDs.
2) Pr: Presets
2) Pr: Presets
Notes:
- Enter Presets 1A-25E!
- Enter preset A-E using pedals 1-5.
- Decrement/Increment bank using pedals 6 & 7. Bank displayed in 7-segment display.
- Pedal 10 toggles the Tuner on/off.
3) FP: Favorite Presets
3) FP: Favorite Presets
Notes:
- Store 10 of your favorite Presets for 1 press recall!
- To store a Preset:
- In Pr mode, select preset via the EurekaPROM-enabled FCB1010.
- Press & Hold the UP pedal until the 7-segment display begins to flash FP.
- Press the pedal you wish to store the Preset. The 7-segment display will flash when stored.
- To recall a Preset, press and release the pedal of your choice.
4) EP: Effects & Presets
4) EP: Effects & Presets
Notes:
- To get to EP mode:
- Go to EF mode.
- Press & Hold the UP pedal until both the EFfects LED & Favorite Presets LED are both lit.
- Pedals 1-5 are from EFfects mode.
- Pedals 6-10 are from FP mode.
MIDI Activity LED
MIDI Activity LED
- In 1-cable mode, the LED is on when MIDI is sent, off otherwise.
- In 2-cable mode, the LED is off when MIDI is sent/received, on otherwise.
VA FAQ
VA FAQ
What do I need for this setup?
A Behringer V-Amp Series processor (V-Amp Pro, V-Amp 3, V-Amp 2, and V-Ampire), a Behringer FCB1010, and one or two MIDI cables depending on your preferred mode of operation.
What do you mean "one or two MIDI cables depending on your preferred mode of operation"?
You may operate this in 1-cable mode, but EF mode is not functional. In two-cable mode EF mode is functional with effect state reflected on pedal LEDs.
Even though I have both MIDI cables connected, when I turn on my V-Amp series processor & EurekaPROM-enabled FCB1010 two-cable mode isn't detected.
The EurekaPROM-enabled FCB1010 boots faster than the V-Amp processor, so if you turn them on simultaneously the EurekaPROM won't detect the return MIDI cable. The solution is to turn on the V-Amp processor first and let it finish booting before you turn on the EurekaPROM-enabled FCB1010.
Have more questions? Check our Forum, or Contact us!
Report abuse