Embedded Files
Discontinued Product
Description
Description
Not only does PP Programmable configuration come with default settings that work perfectly with many effects boxes, but PP Programmable configuration also allows you to program the FCB1010 settings in an easy & intuitive way. You can program:
- MIDI Control Change number AND MIDI Channel for each pedal in EF mode
- MIDI Control Change number AND MIDI Channel for each Expression Pedal
- MIDI Control Change number AND MIDI Channel for Program Changes
- MIDI Channel for SP Mode notes
- Latch or Pulse mode for the FCB1010 switch relays
So not only can you customize the EurekaPROM-enabled FCB1010 to work with any single MIDI device, with programmable multi-MIDI Channel capability you can control multiple MIDI devices simultaneously!
Here's a list of some of the devices our customers use with the PP Programmable configuration:
- Ableton Live
- BOSS VF-1
- Digitech GSP1101
- Eventide Eclipse
- Fractal Audio Axe-FX Standard/Ultra/II
- IK Multimedia Amplitube X-Gear
- Kemper Profiling Amp
- Lexicon MPXG2
- Line6 HD Pro Rack & HD500
- Native Instruments Guitar Rig
- Rocktron Voodu Valve
- Roland GP-100
Overview
Overview
Four Modes, easily switched between using the Up/Down pedals:
- Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state reflected on the pedal LED
- Presets Mode: Easily enter presets 0-127, banks 0-9. Up to 1270 presets!
- Favorite Presets Mode: Allows you to store and recall your 10 favorite presets with the push of a pedal!
- Specials Mode: Control the FCB1010 relays and send MIDI notes!
Expression Pedals programmable for wah & volume. MIDI activity LED. And waterproof labels!
Modes
Modes
Switch between modes with UP/DOWN pedals.
1) EF: Effects
1) EF: Effects
Notes:
- Turn Effects on/off!
- Supports 1 MIDI cable (FCB MIDI out-to-Effects processor MIDI in).
- LEDs do not automatically update, but they still have state, three in fact: off, on, blip (for unknown effects state).
- The CC#'s listed above are the defaults - you can change them to any CC#.
2) Pr: Presets
2) Pr: Presets
Notes:
- Enter Presets 0-127, Banks 0-9 & '-' (for no preceding bank).
- Select Banks with Pedal 1 & 6. Bank displayed in 7-segment display.
- Use Pedals 2-4 & 7-9 to select specific preset. Displayed in 7-segment display.
- Press Pedal 5 to send the MIDI Program Change command.
- With Pedal 10 on, a Program Change command is sent with each preset/bank change. With Pedal 10 off, Pedal 5 must be pressed for the Program Change command to be sent.
- Default preceding bank is CC#0, value = bank#. You can change the default value from 0.
3) FP: Favorite Presets
3) FP: Favorite Presets
Notes:
- Store 10 of your favorite Presets for 1 press recall!
- To store a Preset:
- In Pr mode, select preset, press Send (Pedal 5).
- Immediately Press UP to enter FP mode.
- Press and hold the pedal you wish to store the Preset for ~5 seconds. The 7-segment display will flash when stored.
- Leave FP mode.
- To recall a Preset, press and release the pedal of your choice. Note that the Program Change command is sent on the release, not the press.
4) SP: Specials
4) SP: Specials
Notes:
- Default for switches is toggle. You can change to momentary operation.
MIDI Activity LED
MIDI Activity LED
- The LED is on when MIDI is sent, off otherwise.
Changing the Default Settings
Changing the Default Settings
This video shows you how to program the EurekaPROM-enabled FCB1010 PP configuration:
Here's a step by step guide to programming Basic PP configuration settings:
- Hold down Pedals 9 & 10 on power up.
- The 7-segment display should now show P1 (Pedal 1).
- EF pedal configuration (P1-P0)
- Use the Up and Down pedals to select the CC number (0-127) that will be sent in EF mode for that pedal.
- Press pedal 5 to lock in that selection and move on to the next pedal.
- Continue above steps until done with the last pedal (P0)
- Expression pedal configuration (Ea & Eb)
- Display should now read "Ea" (Expression A)
- Use the Up and Down pedals to select the CC number (0-127) that will be sent when that Expression Pedal is used
- Press pedal 5 to lock in that selection and move on to "Eb" (Expression B)
- Pr Prefix configuration (Pr)
- Display should now read "Pr" (Prefix)
- Use the Up and Down pedals to select the CC number (0-127) that will be sent before any Preset change in Pr mode
- Press pedal 5 to lock in that selection.
- Switch configuration (S1 & S2)
- Display should now read "S1" (Switch 1)
- Use the Up and Down pedals to select whether the Switch will be in toggle (0) or momentary (1) mode
- Press pedal 5 to lock in that selection and move on to "S2" (Switch 2)
- EF pedal configuration (P1-P0)
Here's a step by step guide to programming Advanced PP configuration settings:
- Hold down Pedals 8 & 10 on power up.
- The 7-segment display should now show P1 (Pedal 1).
- EF pedal configuration (P1-P0)
- Press pedal 5 to move to Channel Select. Display should show "Ch"
- Use the Up and Down pedals to select the Channel number (1-16) that will be sent in EF mode for that pedal.
- Press pedal 5 to lock in that selection and move on to CC Select. Display should show "CC".
- Use the Up and Down pedals to select the CC number (0-127) that will be sent in EF mode for that pedal.
- Press pedal 5 to lock in that selection and move on to the next pedal.
- Continue above steps until done with the last pedal (P0)
- Expression pedal configuration (Ea & Eb)
- Display should now read "Ea" (Expression A)
- Press pedal 5 to move to Channel Select. Display should show "Ch"
- Use the Up and Down pedals to select the Channel number (1-16) that will be sent when that Expression Pedal is used.
- Press pedal 5 to lock in that selection and move on to CC Select. Display should show "CC".
- Use the Up and Down pedals to select the CC number (0-127) that will be sent when that Expression Pedal is used
- Press pedal 5 to lock in that selection and move on to "Eb" (Expression B)
- Pr Prefix configuration (Pr)
- Display should now read "Pr" (Prefix)
- Press pedal 5 to move to Channel Select. Display should show "Ch"
- Use the Up and Down pedals to select the Channel number (1-16) that will be sent for any Preset change.
- Press pedal 5 to lock in that selection and move on to CC Select. Display should show "CC".
- Use the Up and Down pedals to select the CC number (0-127) that will be sent before any Preset change in Pr mode
- Press pedal 5 to lock in that selection.
- Switch configuration (S1 & S2)
- Display should now read "S1" (Switch 1)
- Use the Up and Down pedals to select whether the Switch will be in toggle (0) or momentary (1) mode
- Press pedal 5 to lock in that selection and move on to "S2" (Switch 2)
- EF pedal configuration (P1-P0)
PP FAQ
PP FAQ
What's the difference between Basic & Advanced PP programming setting?
Advanced PP programming allows you to set the MIDI channel per EF pedal, per Expression Pedal, and per Pr mode.
What do I need for this setup?
A Behringer FCB1010, a MIDI cable, and a MIDI controlled device (plus that device's MIDI manual).
Are there specific examples of how to set up this configuration with device X?
Check out posts on our forum, and post questions on the forum regarding specific setups.
Do the default settings work with a specific effect device?
The defaults work with the Fractal Axe, BOSS RC-50, and others. Let us know.
Have more questions? Check our Forum, or Contact us!
Report abuse