Configuration 11: Customized for the Eleven Rack
Four Modes, easily switched between using the Up/Down pedals:
Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state reflected on the pedal LED
Presets Mode: Easily enter presets A1-Z4 & a1-z4
Favorite Presets Mode: Allows you to store & recall your 10 favorite presets with the push of a pedal!
Effects & Presets Mode: Access Effects mode pedals 1-5 & Favorite Presets pedals 6-10 in one layout
Expression Pedals programmed for wah/multiFX & volume. MIDI activity LED. And waterproof labels!
Switch between modes with UP/DOWN pedals.
1) EF: Effects
Turn Effects on/off!
Supports 1 MIDI cable (FCB MIDI out-to-Eleven Rack MIDI in).
LEDs do not automatically update, but they still have state, three in fact: off, on, blip (for unknown effects state).
The left expression pedal defaults to MultiFX (CC11), but can be switched to control the Wah (CC4) by turning the wah on with Pedal 5.
2) Pr: Presets
Enter Presets A1-Z4,a1-z4!
Enter preset 1-4 using pedals 1-4.
Decrement/Increment bank using pedal 6 & 7. Bank displayed in 7-segment display. '+' for A-Z, '-' for a-z.
Pedal 8 toggles between Factory and User presets.
Pedal 9 is "EF Flashback". When enabled, you're automatically returned to EF mode after a selecting a rig.
Pedal 10 toggles the Tuner on/off.
3) FP: Favorite Presets
Store 10 of your favorite Presets for 1 press recall!
To store a Preset:
In Pr mode, select preset via the EurekaPROM-enabled FCB1010.
Press & Hold the UP pedal until the 7-segment display begins to flash FP.
Press the pedal you wish to store the Preset. The 7-segment display will flash when stored.
To recall a Preset, press and release the pedal of your choice.
4) EP: Effects & Presets
To get to EP mode:
Go to EF mode.
Press & Hold the UP pedal until both the EFfects LED & Favorite Presets LED are both lit.
Pedals 1-5 are from EFfects mode.
Pedals 6-10 are from FP mode.
MIDI Activity LED
The LED is on when MIDI is sent, off otherwise.
What do I need for this setup?
An Avid Eleven Rack, a Behringer FCB1010, and a MIDI cable.
In Pr mode, what does the alphabet look like on the FCB1010?
A little funky, but definitely readable. And much easier than doing some mathmatical conversion in your head to figure out the rig! The alphabet looks like this: